低温燃烧法制备Mn-CeOx催化剂及其NH3-SCR脱硝性能

Low-temperature combustion synthesis of the Mn-CeOx catalyst and its performance in the selective catalytic reduction of NOx by NH3

    摘要
  • 摘要: 通过低温燃烧法（LCS）制备了不同金属硝酸盐与柠檬酸物质的量比的系列Mn-CeOx（LCS）锰铈催化剂，将其与共沉淀法（CP）制备的Mn-CeOx（CP）锰铈催化剂相对比，结合XRD、XPS、FESEM和H2-TPR等技术表征，对其NH3-SCR脱硝催化性能进行了研究。结果表明，金属硝酸盐与柠檬酸的物质的量比是影响Mn-CeOx（LCS）催化剂脱硝性能的重要因素。虽然两种催化剂中的锰氧化物组分均为无定型，但相较于Mn-CeOx（CP），Mn-CeOx（LCS）表面具有较高的锰含量与Oα/（Oα+Oβ）比，其脱硝催化性能也较高；同时，Mn-CeOx（LCS）锰铈催化剂上有更多的多级孔，有利于气体在催化剂上的吸附和反应。硝酸盐与柠檬酸物质的量比为36：22的Mn-CeOx（LCS）锰铈催化剂在80-180℃下脱硝率可达75%-100%；即使通入SO2，180℃下的脱硝率仍可稳定于74%。

     

    Abstract: A series of Mn-CeOx(LCS) catalysts with different molar ratios of metal nitrates to citric acid were prepared by low-temperature combustion synthesis (LCS) method. Through a comparison with the Mn-CeOx(CP) catalysts prepared by coprecipitation method (CP) as well as various characterization techniques such as XRD, XPS, FESEM, H2-TPR and nitrogen physisorption, the catalytic performance of Mn-CeOx(LCS) in the selective catalytic reduction (SCR) of NOx by NH3 was then investigated. The results show that the molar ratio of metal nitrate to citric acid is an important factor affecting the denitrification performance of the Mn-CeOx(LCS) catalysts. In comparison with the Mn-CeOx(CP) catalysts, the Mn-CeOx(LCS) catalysts are provided with a higher manganese content and high Oα/(Oα+Oβ) ratio on the surface as well as more hierarchical pores favorable for adsorption and reaction of reactants, which affords the Mn-CeOx(LCS) catalysts much better denitrification performance. Over the Mn-CeOx(LCS) catalyst with a molar ratio of metal nitrate to citric acid of 36:22, the denitrification rate at 80-180℃ reaches 75%-100%; even in the presence of SO2, the denitrification rate over the Mn-CeOx(LCS) catalyst at 180℃ keeps at the level of 74%.

     

    • HTML全文
    • 参考文献(12)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回